Specifications:
1) Rated voltage: 220V / single phase
2) Power range: 0.2 ~ 1.5kW
3) Output frequency: 1.0 ~ 400Hz
| Input Voltage Level |
220V |
| Model S8000-2s*** |
0.2G |
0.4G |
0.75G |
1.5G |
| Applicable Motor Power(kw) |
0.2 |
0.4 |
0.75 |
1.5 |
| Rated output capacity(Kva) |
0.6 |
1.0 |
1.6 |
2.9 |
| Rated output current(A) |
1.6 |
2.5 |
4.2 |
7.0 |
| Maximum output voltage(v) |
SINGLE-PHASE CORRESPONDING INPUT VOLTAGE |
| Range of output frequency(Hz) |
1.0~400 Hz |
| Rated input current(A) |
4.9/2.4 |
6.5/3.0 |
9.7/5.1 |
15.7/9 |
| Admissible variation range |
Single-phase power supply 200-240V 50/60Hz |
| of input voltage |
| Variation range of power |
+-5% |
| supply frequency |
| Control mode |
V/F& SVPWM spatial vector modulation |
| (carrier 2kHz-12kHz) |
| Resolution of output frequency |
0.1 Hz |
| Torque characteristic |
Torque and speed drop compensation function. |
| trigger torque can be up to 150% in 3 Hz |
| Overload toleration |
60 seconds under 150%of Rated output current |
| Accelerating and decelerating time |
0.1~600seconds(can be set independently) |
| V/F curve |
Randam V/F curve setting |
| Action adjustment to avoid losing speed |
|
|
Set by percent of Rated current, 20%~200% |
| Protective Function |
Over-voltage, over-current, low-voltage, overl |
| oad limits, electronic thermocouple, overheat, |
| self-check, ground protection, abnormal port |
| Type of Cooling |
Air-blast cooling |
| Using location |
Lower than 1000m, indoor(keep from corrosive |
| gases, liquids and dust) |
| Environment temperature |
-10~40(no dewing and icing) |
| Storage temperature |
-20~60 |
| Humidity |
Below 90%RH(no dewing) |
| Vibration |
9.80665m/s2 below 20Hz(1G) 5.88m/s2 below |
| 20~50Hz(0.6G) |
Audited Supplier 
){kind=link}
){kind=link}