| Model |
S2100S |
| Input |
Rated voltage,Frequency |
3 AC 380V / 220V; 50-60 Hz |
| |
Voltage Range |
380V: 330V~440V;220V: 170-240V |
| Output |
Voltage Range |
380 V: 0~380 V; 220V: 0-220V |
| |
Frequency Range |
0.10~400.0 Hz |
| Control method |
V/F control,Space verctor control |
| Indication |
Operating status/Alarm definiton/interactive guidance;eg,frequency setting,the output frequecy/current,DC bus voltage,the temperature and so on. |
| Control Specification |
Output Frequency Range |
0.10~400.00 Hz. |
| |
Frequency Setting Resolution |
Digital input: 0.01 Hz.
Analog input:0,1% of maximum output frequency |
| |
Output Frequency Accuracy |
0.01 Hz. |
| |
V/F Control |
Setting V/F curve to satisfy various load requirements |
| |
Torque Control |
Auto increase:auto riase torque by loading condition;Manual increase:enable to set 0.0~20% of raising torque |
| |
Multifuncional Input Terminal |
8 multi-function input terminals,realizing fuctions including fifteen section speed control,program running, four-section acceleration/deceleration speed switch,UP/DOWN function and emergency stop and other functions |
| |
Multifuntional Output Terminal |
3 multi-function output terminals for displaying of running,zerospeed,counter,external abnormity,program operation and other infornation and warnings |
| |
|
8 multifunitinal output terminals, 1 inverter can control 4 ciircular variable frequency pumps |
| |
Acceleration/deceleration Time Setting |
0~6000 s acceleration/deceleration time can be set individually |
| Other functions |
PID Control |
Built-in PID control |
| |
RS485 |
Standard RS485 communication function (MODBUS) |
| |
Frequency Setting |
Analog input 0~10V, 0~20, can be selected; Digital input: input using the setting dial of the operation panel or RS 485 or UP/DOWN |
| |
Multi-speed |
Eight multifunction input terminals,15 section speed can be set |
| |
Automatic voltage regulation |
Automatic voltage regulation function can be selected |
| |
Counter |
Built-in 2 group of counters |
| |
Overload |
120%,60second (variable torque) |
| |
Over Voltage |
Over voltage protection can be set |
| |
Under Voltage |
Under voltage protection can be set |
| |
Other Protections |
Overheat,output shortcircuit,over current,and parameter lock and so on. |
| Environment |
Ambient Temperature |
-10ºC~40ºC(non-freezing) |
| |
Ambient Humidity |
Max. 95% (non-condensing) |
| |
Altitude |
Lower than 1000. |
| |
Vibration |
Max. 0.5 g |
| Structure |
Cooling Mode |
Below 3.7 kW no have fan; Above 5.5 kW Forced air cooling |
| |
Protective Structure |
IP 65 |
Audited Supplier 
){kind=link}
){kind=link}