Power 150W Any Resistance Wire Wound Aluminum Braking Resistor

• Resistance: Fixed Resistor
• Function for Resistance: Protective Resistor
• Installation: SMD Resistor
• Material: Wire-wound Resistor
• Packaging: Surface Mount
• Type: Thermal Resistor
• Model NO.: CAR
• Quantity: Duplex
• Shape: Square
• Resistance change scale: Log Scale
• Application: Medical Apparatus and Instruments
• Brand: ROHM
• Power Range: 10W~6000W
• Voltage Range: 05kv-10kv
• Resistance Range: 0.1r-20kr
• Operating Temperature: -55°c~+165°c
• Function: Strong Overload Capacity
• Production Capacity: 5000

Product Description

Description:
1000W Aluminum Housed Braking Resistor Resistance Dummy Load Audio 4 8 16 Ohm

Specifications:
Item Name: Aluminum Resistor
External Material : Aluminum
Color: Silver
Quantity: 1 piece
Resistance Value: 4 ohm, 6 ohm, 10 ohm
Resistance Tolerance: ±5% (J)
Rated Power : 1000W
Overall Size: about 33 x 6 x 3cm / 13.0" x 2.4" x 1.2"( LxWxT )
Cable Size: about 35cmx3mm ( Length x Diameter)

Features:
-- Adopt aluminum housed surface, good heat dissipation effect
-- Good heat radiation performance in Aluminum shell
-- 1000W high power, strong surge capability
-- 4/8/16 Ohm resistance value available for optional
-- Simple easy installation, good-looking design
-- With vibration resistance
-- Nylon wrapped wire with solder lug terminals
-- Widely used in power supply, transducer, elevator and so on

Package Included:
1x Braking Resistor

Kindly Note:
1. Please allow 1-2cm error due to manual measurement. Please make sure you do not mind before you bid.



 

Serial number	Item	Capability   require	Test method
1	Resistance and resistance variance	R≥1Ω ±5% R<1Ω ±10%	Accordance  with  JIS-C-5202 5.1
2	Resistor temperature Coefficient	R>20Ω,±260 ppm/ºC  R≤20Ω,±400 ppm/ºC	To run within temperature range  -25~200ºC, factor shall be in accordance with JIS-C-5202 5.2
3	Rating load	Superficial temperature≤375ºC	Correctly mounted on 300×300×3mm plate aluminium ,accordance with JIS-C-5202  5.4
4	Short term overload	No abnormality ΔR≤±(2%R+0.05Ω)	Application of 10 times higher than rating voltage for 5 seconds under the same invironment, accordance with JIS-C-5202  5.5
5	Insulation resistance	No abnormality R≥100MΩ	Insulation resistance shall be 100 MΩ or more between terminal and case when measured with DC 500V insulation resistance tester, accordance with JIS-C-5202  5.6
6	Withstand voltage	No abnormality  no destroying ΔR≤±(0.1%R+0.05Ω)	No abnormality shall be found when AC 2500V applied between terminal and case for 1 min, accordance wirh JIS-C-5202  5.7
7	Terminal strength	No abnormal or Loosing	A static load of 100N in the direction of terminal for 30 seconds, accordance to JIS-C-5202 6.1.2(1)
8	Vibration proof	No abnormal ΔR≤±(0.1%R+0.05Ω)	No mechanical damage shall be observed where vibration applied in a cycle of 10~55HZ 1.5mm wide in the three directions for 1 minute, keeping 2 hours in each direction. Accordance  with JIS-C-5202  6.3