AC Servo System Msd 100 Series Motor

• Customization: Available
• Application: Industrial
• Speed: Low Speed
• Model NO.: MSD100 servo drive
• Function: Automatic Control
• Casing Protection: Protection Type
• Number of Poles: 4
• Starting Mode: Variable Frequency Starting
• Certification: Ce
• Using/Saving Temperature: 0~+55°c/20~+85°c
• Using/Saving Humidity: Less Than 90%Rh
• Speed Control Range: 3.513888889
• Task: Program
• Structure: Combination
• Mathematical Model: Linear
• Signal: Continuous
• Condition: New
• Customized: Non-Customized
• Material: Aluminum Alloy
• Transport Package: Box
• Specification: CE
• Trademark: machtric
• Origin: Fujian
• HS Code: 8504409999

Product Description

 

Control ways				1.position control
				2.speed control
				3.torque control
				4. Various combinations of control
Feedback type				1. Incremental square wave
				2.cosine type
				3.others
Using condition		using/saving temperature		0~+55°C/20~+85°C
		using/saving humidity		less than 90%RH
		Vibration resistance/Impact resistance		4.9m/s2/19.6m/s2
Performance		speed control range		3.513888889
		Speed changing ratio	load changing ratio	0-100% load:less than 0.01%
			voltage ratio	rated voltage ±10%: 0%(in the rated speed)
			temperature changing ratio	25±25°C: less than ±0.1%(in the rated speed)
		Frequency performance		1KHz(JL = JM)
		Torque control accuracy		±2%
		Soft start time setting		0~10s
Input signal	speed command and torque command input	command voltage		DC 10V variable setting range/rated speed or rated torque;Input voltage:maximum,positive instruction when motor rotates in the positive direction
		Input impedance		about 14kΩ
		the circuit time constant		about 47μs
	Contact speed instruction	Rotation direction selection		using P action signal input
		Speed selection		using/SPD-A/SPD-B/SPD-D to choose motor direction rotation speed
Performance	offset setting			0~450 r/min(Set the resolution 1 r/min)
	feedback compensation			0~100%(Set the resolution 1%)
	positioning completed width setting			0~250 instruction unit (Set the resolution 1 instruction unit)
Input signal	instruction pluse	input pluse kinds		1. Symbol+pluse sequence 2. CW+CCW pluse sequence
				3. phase difference is 2 phase pluse (A phase and B phase)
		Input pluse status		Differential drive(5V);
				Open collector(5V, 12V, 24V)
		Input pluse Frequency		Differential drive: maximum 1MHz
				open collector: maximum 200kHz
	control signal			clear signal(input pluse status is the same as instruction pluse)
position output	output status			Aphase Bphase Zphase, Differential drive output
	requency division ratio			any frequency division
input signal in order	can conduct signal distribution's change			servo ON,P action (or control mode switch,switch the motor's positive rotation or reverse rotation by the internal speed setting,zero clamp,instruction pluse prohibited) prohibit positive drive(P-OT) prohibit reverse drive(N-OT),alarm reset,current limit at positive side, current limit at reverse side(Internal speed selection)
output signal in order	fixed output			servo alarm
	can conduct signal distribution's change			select 3 signals from positioning completed(same speed),motor rotating,servo ready,current limiting,speed limiting, release the brake,alarm,NEAR signal
Dynamic brake function				the main power OFF,servo alarm,servo OFF, action when overtravel
The electronic gear				0.001≤B/A≤4000
Protection function				over current,lack voltage,overload, abnormal regeneration,main circuit detection abnormal, Heat sink overheat,power lack phase,overflow,overspeed,encoder abnormal,avoid the out of control,CPU abnormal,position offset,others
Analog monitoring functions				built-in analog monitoring connector that can observe speed,torque instruction
				Speed: 1V corresponding to 1000r/min
				Torque: 1V/100% rated torque
				Position offset pluse:0.05V/1 instruction unit or 0.05V/100 instruction unit
Communication function	communication type			CAN, RS485, USB
	Shaft address setting			set according to the user parameters
	1: N communication			RS-485 port can connect the maximum of 255 stations
	Functions			status display,the user parameters setting Monitoring display,alarm tracking display,JOG operation and automatic tuning operation,speed,torque instruction signal,etc
Others				the origin retrieval, the motor's automatic identification function. Power's high harmonic suppression

About us:
 
Quanzhou Machtric Automation Equipment Co., Ltd is a company who manage international High Tech Products in the guidance of International Business .  With the help of the Strength R&D, System Engineering , taking advantage of the its abundant international trade resources, we have solved many problems for different customers.  At the same time, we have managed many another famous foreign brand in multi-level.  We would like to be one of the most popular Industry Automation Solution Suppliers.  We try to provide wisdom, individual product solution. 
Our products:

1. Inverter series:

Vector series: Z900,  ,S2800E,S1100VG,S2200E, S3800E series

Universal series: S2800E, S1100VG,S900GS series, S2100S series 

Dedicated series: S100 Series, S200 series(circular knitting machine)
 
Mini Series  : S800E 

 

Why choose us

 
 
More than 15 years - we are more than 15 years professional manufacture frequency inverter
 
More than 50 countries- we exported our products to more than 50 countries all over the world.
 
Professional work team- we can accept OEM ODM
 
Powerful production capacity - we can offer a large quantity products each month.
 
Certification -we have passed CE
 
We offer 24 hours service