380V 4kw New AC Motor Drive/Varibale Speed Drives/Frequency Inverter/VFD

• Application: High-performance Transducer
• Output Type: Triple
• Principle of Work: V/F Control Transducer
• Switch Mode: PWM Control
• Main Circuit Type: Voltage
• Voltage of Power Supply: Low Voltage Variable-Frequency Drive
• Model NO.: S800E inverter
• Link of Transformation: AC-DC-AC Variable-Frequency Drive
• Nature of DC Power: Voltage Variable-Frequency Drive
• Function: Simple Type
• Brand: Machtric AC Drive
• Speed Range: 1:100(SVC)
• Power Range: 0.75~5.5kw
• Voltage Range: 110V/220V & 380 V
• Frequency Range: 1:100(SVC)
• VFD: Variable Frequency Drive
• Transport Package: Carton
• Specification: CE
• Origin: China
• HS Code: 8504409999
• Production Capacity: 50000

Product Description

Items			S800E
Power Supply	Rated voltage, Frequency		One-phase/Three-phase AC 220V 50/60Hz
	Voltage Range		220V: 170~240V
Output	Voltage Range		220V: 0~220V
	Frequency Range		0.10~400.00Hz
Control method			V/F control, Space vector control.
Indication			Operating status/Alarm definition/interactive guidance: eg , frequency setting, the output frequency/ current, DC bus voltage, the temperature and so on.
Control   SpeciAlations		Output Frequency Range	0.10Hz~400.00Hz
		Frequency Setting Resolution	Digital input: 0.01Hz, analog input: 0.1% of maximum output frequency
		Output Frequency Accuracy	0.01Hz
		V/F Control	Setting V/F curve to satisfy various load Requirements.
		Torque Control	Auto increase: auto raise torque by loading Condition; Manual increase: enable to set 0.0~20.0% of raising torque.
		Multifunctional Input Terminal	Four multi-function input terminals, realizing functions including fifteen section speed control, Program running, four-section acceleration/deceleration speed switch, UP/DOWN function and emergency stop and other functions
		Multifunctional Output Terminal	1 multi-function output terminals for displaying of running, zero speed, counter, external abnormity, program operation and other Information and warnings.
		Acceleration/ deceleration Time Setting	0~999.9s acceleration/deceleration time can be set individually.
Other      functions		PID Control	Built-in PID control
		RS485	Standard RS485 communication function(MODBUS)
		Frequency Setting	Analog input: 0 to 10 V, 0 to 20mA can be selected; Digital input:Input using the setting dial of the operation panel or RS485 or UP/DOWN. Note:AVI terminals can be used to select an analog voltage input(AV) and analog current input(AI) through the switch J2. Note: AVI terminals can be used to select an Analog voltage input (AV) and analog current Input(AI) through the switch J2.
		Multi-speed	Four multifunction input terminals, 15 section speed can be set

Protection/Warning        Function	Overload	150%, 60 second(Constant torque)
	Over Voltage	Over voltage protection can be set.
	Under Voltage	Under voltage protection can be set
	Other Protections	Overheat,output short circuit,over current, and Parameter lock and so on.
Environment	Ambient Temperature	-10ºC to 40ºC(non-freezing)
	Ambient Humidity	Max. 95% (non-condensing)
	Altitude	Lower than 1000m
	Vibration	Max.0.5G
Structure	Cooling Mode	Forced air cooling
	Protective Structure	IP 20
Installation	Mode	Wall-mounted or standard 35MM rail mounting

Product series models

Model	Input	Power Output (KW)	Capacity (KVA)	Current Output (A)	Load Capacity (60s)(A)	Motor Equipped (KW)
S800-2T0.4GE	1PH/3PH 220V- 50/60HZ	0.4	1.0	2.5	3.75	0.4
S800-2T0.75GE		0.75	2.0	5.0	7.50	0.75
S800-2T1.5GE		1.5	2.8	7.0	10.50	1.5

Main Circuit Wiring NoticeThe S800E series is a highly reliable product, but incorrect peripheral circuit making or operation/handing method may shorten the product life or damage the product.
Before starting operation, always recheck the following items.
 
Use crimping terminals with insulation sleeve to wire the power supply and motor.
 
Application of supply power to the output terminals( U,V,W) of the inverter will damage the inverter. Never perform such wiring.
 
 
After wiring, wire offcuts must not be left in the inverter. Wire offcuts can cause an alarm, failure or malfunction. Always keep the inverter clean. When drilling mounting holes in an enclosure etc., take are not to allow chips and other foreign matter to enter the Inverter.
 
This inverter must be earthed. Earthing must conform to the requirements of national and local safety regulations and electrical codes.
 
Use the thickest possible earth cable.
 
 
Then grounding point should be as near as possible to the inverter, and the ground wire length should be as short as possible.
 
Where possible, use independent earthing for the inverter. If Independent earthing is impossible, use joint earthing(,) where the inverter is connected with the other equipment at an earthing point.Joint earthing as in ()must be avoided as inverter is
connected with the other equipment by a common earth cable