S3100A General Application Heavy Torque 380V AC Drive 0.75kw 1.5kw Savch VFD

• Application: High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer
• Output Type: Triple
• Principle of Work: V/F Control Transducer
• Switch Mode: PWM Control
• Main Circuit Type: Voltage
• Voltage of Power Supply: High Voltage Variable-Frequency Drive
• Model NO.: S3100A
• Link of Transformation: AC-DC-AC Variable-Frequency Drive
• Nature of DC Power: Voltage Variable-Frequency Drive
• Function: Simple Type, Textile Special, Heavy Loading Machines
• Brand: Machtric
• Item Name: Savch VFD
• Carrier Frequency: 1-15kHz
• Control Mode: V/F Control/ Vector Flux Control
• Output Power: 220V(0.4-2.2kw);380V(0.75-400kw)
• Multi Speed: 16 Segments Speed
• Jog Frequency Range: 0.00-50.00Hz
• Pid Control: Built-in
• with C3 Filter: Yes
• Maximum Frequency: 600.00Hz
• Interface RS-485: Standard RS485 Communication Function
• Transport Package: Standard Export Packing
• Specification: Depends on different voltage/frequency range
• Trademark: Machtric
• Origin: China
• HS Code: 850440999
• Production Capacity: 5000 Pieces Per Month

Product Description

S3100A General Application Heavy Torque 380V AC Drive 0.75kw 1.5kw SAVCH VFD
 

Product Specification:

	Item	Detailed information
control characteristic	control mode	V/F  control , open loop vector control , torque control
	range of output frequency	0-500.00Hz(v/f highest 3200.0Hz)
	frequency setting resolution	0.01Hz
	ouput frequency setting resolution	0.01Hz
	PWM carrier frequency	adjust from 0.5Khz to 12khz
	torque boost	open loop vector control(SVC):G type:0.5Hz/150%,P type 0.5Hz/120%
	V/F curve	three types :line, multi-point. Nth power v/f curve (1.2th power ,1.4th power ,1.6th power ,  1.8th power ,2th power
	v/f separation	twp types : full separation , semi-separation
	Jump frequency	adjust from 0.1hz to 500.00hz
	acceleration/deceleration time	0.00 to 65000 seconds(4-stage acceleration/deceleration time is set independetly)linear or S-curve acceleration/deceleration mode
	over current stall prevention level	can be set according to the motor load charactreristics with 100-200% of the rated current of the driver
	DC brake	when stopping , it can be operated from 0.00 to the maximum operating frequency , and the braking current is 0 to 100% of the rated current;Start time 0-100.0 seconds, stop time 0-100.0 seconds
	Brake torque	20%(external optional brake resistor can reach 125%) (1-30HP brake transistor built-in,40HP and above can be connected to the external brake unit module
operation charactreistic	Speed ratio	open loop vector control :1:100
	Frequency  setting signal	bit operation board :set by
		external terminal :0-10VDC,4-20mADC, Serial communication(RS485)
	Operation signal	bit operation board :Available to be oerated by RUN, STOP, JOG keys
		external terminal :2-wire/ 3-wire operation ,jog operation , serial communication(RS485)
	Input terminal of multi-function	Forward and reverse running, three-wire operaton control, Forward and reverse jog running,free stop, reset fault, running pause, external fault input, increment /decrement frequency terminal setting,16-segment prese speed switching,acceleration/deceleration time switching ,frequency source switching, running command switching,PID control, PLC status  reset, pause swing frequency, reset swing frequency, prohibit acceleration and deceleration, disable torque control, calculator function, length count frequency increase and decrease setting clear, high speed pulse  frequency , stop DC braking, frequency modification enable, speed control and torque control switching, clear running time of this time.
	output terminal of multi-function	Inverter operation, fault output, frequency level detection FDT output  frequency arrival, zero speed operation,overload pre-alarm count value arrival length arrival, PLC cycle completion, cumulative running time
	Item	Detailed  information
		arrival ,frequency limitation , torque limit ready to run , ACI1>AVI2, upper limit frequency  arrival ,lower limit frequency arrival(operation related). undervoltage status output, communication setting , cumulative power-on time arrival , frequency arrival output , timing arrival output, offload , recerse In operation , the zero current state, the module temperature reaches , the output current exceeds the limt, the lower limit frequency  arrives(the stop is also output ) the alarm output (contrinues to run ) and the running time arrives
	analog signal output	corresponding to the actual output frequency , output current , output voltage,etc.
	fault signal contact	contact"ON"(one "C" contract relay or two open collector outputs when the AC drive fails
	inner function	Output frequency upper and lower limit seing, instantaneous power failure restart abnormal fault restart speed tracking  Simple PLC.multi-speed operation,PID control, timing control Automatic regulated output regulation  Abnormal record. parameter lock, parameter factory reset  Reverse rotation prohibited,overcurent stall prevention, overvoltage stall prevention, electronic thermal relay
	protection function	Short circuit protection, acceleration over current, deceleration over current, constant speed over current, acceleration over voltage.  deceleration over voltage, constant speed over voltage, bus undervoltage fault. motor overload. inverter overload. over torque protection, loss phase protection function  on the input (7.5G/11P and above),loss phase on the output , module  overheating. external fault, communication fault, current detection fault. motor self-leaming faut, parameter read and write abnormality, inverter hardware abnormality, motor short circuit to ground., running time arrival. the power-on time arrives, the load dropped. the PID feedback disconnected. and the fast current limit timeout
	number of part on keypad	Contains 8 function keys,5-digit8-segment LED display,7 status indicato LED lightsCan set the frequency,display the actual output frequency. output current, user-defined unit Parameter browsing and modification settings and parameter locking,abnormal fault display Executable operation, stop,reset, forward/reverse, jogging
environment	operation  temperature	_10ºC to + 50ºC( + 40ºC~ + 50ºC below 90% RH, No condensation)
	temperature of stock	.-20ºC to .+60ºC
	humidity of opeation environment	belowe 90%RH,NO  condenstaion
	height  of installtion	no more than 1000m in height, no corrorsive gas, liquid , dust
	vibation	Below 20Hz 9.80665m/s²(1g), 20-50Hz 5.88m/s²(0.6g)
	enclosure	IP20(Depending on the end customers`s installation environment)
Note: the instantaneous power failure compensation time varies due to the inverter capacity.If a long instataneouspower failure time is required, the external"instantaneous power failure compensation device can be added

2.Detail Picture: