| Customization: | Available |
|---|---|
| Type: | Aluminum Electrolytic Capacitor |
| Application: | General Purpose, AC / Motor, Fan |
|
Still deciding? Get samples of US$ 35/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 400V 6800uf Introduction to basic parameters | |||
| Rated voltage: | 400V | Rated Capacity: | 6800uF |
| Temperature: | 85ºC | Life: | 2000h |
| Weight: | about1020g | Package size: | 77*155mm |
| Installation method: | Clamp fixing | Accessory: | Screw M6*12 2PCS |
| Packing quantity: | 12pcs/box | Accessory: | Clamp 1PCS |
400V6800uf Introduction to electrical performance parameters
| Rated voltage: | Surge voltage | Rated Capacity: | Capacity deviation | Loss tangent | ESR Typical value | Leakage current | Rated ripple current |
| (V.DC) | (V.DC) | (μF) | (%) | (MAX) | (mΩ) | mA , MAX, 5min | (A) |
| 400 | 450 | 6800 | -20~+20 | 0.2 | 19 | 5 | 16 |
| At 120Hz 20ºC | 85ºC 120Hz | ||||||
400V 6800uf Bolt Electrolytic Capacitor Size Introduction
1.Outline size
| D: 76.9mm | d2MAX: 17.4mm | L: 155mm | L1: 160.8mm | Screw: M6X12 |
| c: 88.9mm | d: 98.4mm | a: 31.7mm | H: 30mm | Number of casing layers: 2 |
The electrolytic capacitor is fixed by upper and lower pads made of EPS (polystyrene foam) material. The EPS material has good characteristics of waterproof, impact and anti-extrusion, which can better protect the electrolytic capacitor.
The aluminum electrolytic capacitor is discharged by a conductive strip, and a conductive strip with a resistance of about 3 k ohm is mounted on the pad on the package, and the product is always discharged after being packaged. Compared with other electrolytic capacitor manufacturers, direct short-circuit discharge such as steel wire can better protect the bolt aluminum electrolytic capacitor.
Clamp mounting structure
Electrolytic capacitor production process
){kind=link}