| Customization: | Available |
|---|---|
| Application: | High-performance Transducer |
| Output Type: | Triple |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Sanch S1100 Frequency inverter
| Controlling Characteristics | Control mode | Adopting SVPWM modulating techniques (V/F control and Speed Sensor-less Vector) | |||||||||||||
| Output range of frequency | 0.01~400.0Hz | ||||||||||||||
| Frequency setting analyzing degree | 0.01Hz | ||||||||||||||
| Output frequency analyzing degree | 0.01Hz | ||||||||||||||
| PWM load wave frequency | Available to modulate from 2 to 10kHz | ||||||||||||||
| Torque increase | Auto torque-increase and auto slip compensation at 2 Hz the starting torque can reach 150% of rated torque. | ||||||||||||||
| Jog frequency | 3 points can be set from 0.01 to 400.0Hz | ||||||||||||||
| Acceleration/deceleration time | 0.01 to 600.0 seconds. (2 steps of accel/decel time can be set separately.) | ||||||||||||||
| Stall Prevention Level | According to the load characteristics of motor, it's available to be set as 50 to 200% of the rated current of the drive | ||||||||||||||
| DC braking | Available to be operated from 0.01 to 400.0 Hz from STOP, braking 0 to 100% of the rated current. Starting time 0.0 to-60.0 sec, Stopping time 0.0-60.0 sec | ||||||||||||||
| Braking torque | 20% (125% shall be available if connected with purchase braking resistor externally) (or 1 to 25HP, equipped within the electric crystals, for 30 HP, braking unit module shall be connected externally.) | ||||||||||||||
| V/F curve | V/F curve available to be set | ||||||||||||||
| Operation characteristics | Frequency setting signal | Digital Operator | Set by UP and DOWN | ||||||||||||
| External terminals | 0-10VDC, 4-20mADC, Series Communication Board (RS-485) | ||||||||||||||
| Running operatisignal | Digital Operator | Available to be operated by RUN, STOP and JOG keys. | |||||||||||||
| External terminals | 2 wire styles (Fwd/Stop, Rev/Stop, Run/Stop and Fed/Rev) /3 wire operation, JOG running, Serial Communication Board(RS-485) | ||||||||||||||
| Intelligent Input Terminal | Switching of 16 step pre-set available speed; Switching of First/Second acceleration/deceleration time; prohibiting acceleration/deceleration and external interrupt input; Jog running UP/DOWN frequency terminal setting; Count terminals | ||||||||||||||
| Intelligent Output Terminal | During running, frequency agreement output, non-zero count agreement output, over torque output, external interrupt reference. Low voltage detection, operation mode reference, fault output and external fault interruption. | ||||||||||||||
| Analog signal output | Correspond to actual output frequency or output current. | ||||||||||||||
| Fault signal contact | Contact of ON at AC motor drive (Relay with one C contact or two open collector output.) | ||||||||||||||
| Built-in Function | Setting max/min output frequency; momentary power off restarting; fault restaring; setting of S curve acceleration/deceleration time; auto-voltage stabilizing output modulation; digital frequency output signal; fault records; parameters locking; reset to factory setting; inhibiting reverse run; over current stalling prevention, over voltage stalling prevention, electrical thermal relay. | ||||||||||||||
| Protection Function | Over current; over voltage, low voltage; external fault interruption input; motor over load; GFF: grounding protection(For optional use); over load of the drive and drive overheating | ||||||||||||||
| Digital operator | Consisting of 8 functional keys, 7 step LED in 5 digits; 5 status LED indicators. Available to set frequency, display actual output frequency, output current, self-determined unit parameter overview of users, modify settings and for parameter locking, fault displaying. Available to perform running, stop, reset, fwd/rev run and jog run. | ||||||||||||||
| Environment | Operational Environment temperature | -10°C to +50°C (+40°C ~ +50°C available when the dust cover is removed) | |||||||||||||
| Storing temperature | -20°C to + 60°C | ||||||||||||||
| Installation height | Lower than 1000m, without corrosive gas, fluid and dust. | ||||||||||||||
| Vibration | Below 20Hz 9.80665m/s² (1g), 20~50 Hz 5.88m/s² (0.6g) | ||||||||||||||
| Protection degrees | Determined by the installation environment of the end-users. | ||||||||||||||
PRODUCT ADVANTANGE
- Many machine lines and output is 10000set /month
- Customized specification is accepted.
- implement strict quality testing and control procedure to make superior quality.
- Delivery:10-20 days (urgent 5-10 days)
- Certification:ISO 9001,ISO14001,OHSAS18001 & CE
COMPANY ADVANTAGE
- Qualified inverter supplier for Fuji Electric (Japan)
- 10 years OEM/ODM Experience
- Manufacture in this field for almost 20 years experience.
- Reasonable price and punctual delivery time
- 70 R & D personnel have many years experience
- Received the National Invention Award
Major Customers
- Fuji Electric
- Jeltron System PVT
- Senterno Sas
- Sinar Surya
- Electric Otomyson
1 Reliability
2 Lower heat
3 High performance
4 Faster computing speed
5 More excellence performance
Variable frequency inverters
Specifications:
1) Rated voltage: 220V / single phase, 220V / three phase, 440V / three phase
2) Power range: 0.75 ~ 22kW
3) Output frequency: 0.1 ~ 400Hz
Quanzhou Machtric Automation Equipment Co., Ltd is a company who manage international High Tech Products in the guidance of International Business .
With the help of the Strength R&D, System Engineering , taking advantage of the its abundant international trade resources, we have solved many problems for different customers.
At the same time, we have managed many another famous foreign brand in multi-level.
We would like to be one of the most popular Industry Automation Solution Suppliers.
We try to provide wisdom, individual product solution. 
Variable Frequency Drives Variable Speed Drives Frequency Converters AC converters
Frequency Inverters AC Drivers AC Drives AC Motor Drives VFD VSD Transistorized Drives
Why choose Sanch frequency inverter?
1.Easy operating system.--- easy but effective software ,gentle touch achieve.
2.Stable performance--- best famous company ensure the quality all the time.
3.Excellent after sales service--- never leave you along.
4.Fast delivery --- safety delivery ,we look after it all the time.
){kind=link}