Specifications:
1) Rated voltage: 440V / three phase
2) Power range: 5.5 ~ 55kW
3) Output frequency: 0.1 ~ 400Hz
Features:
1) Automatic setting for acceleration / deceleration
2) 16-level preset table speed, switch of 4-level accelerating/decelerating time
3) RS-485 in-line interface build-in
4) Automatic control of motor parameters, precise location control
5) Automatic voltage regulation (AVR)
6) All-dimensional protection
7) Includes PID circuit control
8) Senseless vector control
9) Program and vector control of fan and water pump makes it more economical.
| Input Voltage Level | 440V level |
| ModelS3000-***/***43* | 055 | 075 | 110 | 150 | 185 | 220 | 300 | 370 | 450 | 550 | 750 |
| Apply for rated power of | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | 55 | 75 |
| 3-f MOTOR(KW) |
| Apply for rated power of | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 75 | 100 |
| 3-f MOTOR(HP) |
| Contant torque output | 13 | 18 | 24 | 32 | 38 | 45 | 60 | 73 | 91 | 110 | 150 |
| current |
| Variable torque output | 16 | 22 | 30 | 40 | 47 | 56 | 75 | 91 | 113 | 138 | 188 |
| cureent |
| Rated output capacity(kva) | 9.9 | 14 | 18 | 24 | 29 | 34 | 46 | 56 | 69 | 80 | 100 |
| Maximum output voltage(v) | Three-phase power supply 380~440V corre |
| sponding to input voltage |
| Rated input voltage/frequency | 380/400/415/440Vcorrespongding to input |
| voltage |
| Operating voltage/frequency | 340~500VAC, 47~63Hz |
| Control system | Selection of sine wave PWM |
| vector control; torque control; V/F |
| Activating torque | Activating toque is more than 150%in0.5HZ |
| Control range of speed | 1: 100(can be up to 1: 1000 when have |
| external PG) |
| Control precision of speed | +-0.5%(can be up to +-0.02%) |
| Speed reactivity | 5Hz(can be up to 30Hz under vector control) |
| Maximum output frequency(HZ) | 0.00 to 400.00Hz |
| Frequency output precision | Digit instruction +-0.005%, |
| analog instruction +-0.5% |
| Frequency setting resolution | Digit instruction 0.01Hz, analog instructio |
| n: maximum output frequency is 1/1000(bit) |
| Torque limit | Maximum 200% torque current |
| Torque precision | +-5% |
| Accelerating/deceleratingtime | 0.00~600.00 seconds/0.00~6000.00 seconds |
| V/F curve | Randam V/F curve based on four points& |
| quadratic curve |
| Frequency setting signal | +10V, +-10V, 4~20mA, pulse wave input |
| Dynamic brake | About 20% |
| Motor protection | Electronic thermocouple protection |
| ` | Current restrain 170%, over-current protect |
| ion 200% of rated current |
| Ground protection for current | Current leakage protection; 50% peak value |
| leakage | of rated current |
| Overload capacity | Constant/variable torque 150% for |
| 60 seconds, 200% for 2 seconds |
| Voltage protection | Over-voltage position: Vdc> 400/800v |
| low-voltage position: Vdc< 200/400v |
| Over-voltage protection for | Surge wave absorber(MOV) |
| input power supply |
| Over-heat protection | Built-in temperature sensor |
| instantaneous power-off | Parameter setting can be up to 5 seconds |
| compensation |
| Protection level | NEMA 1/IP21 |
| Operating temperature | -10 ~ 40 for UL & -10 ~50 for CE |
| Storage temperature | -20 ~60 |
| Humidity | Below 90%RH(non-condensing) |
| Vibration | 1.0G below 20Hz, 0.6G at 20~60HZ |
| Cooling system | Air-blasst cooling(RUN, STOP) |
| Mounting height | Lower than 1000m |
| Keep from corrosive gases, liquid and dust |
Audited Supplier 
){kind=link}