AC 380V 15/18.5/22kw Vector Variable Frequency Drive

• Customization: Available
• Application: General Transducer, Single-phase Transducer, Single \Three Phase
• Output Type: Triple
• Model NO.: S800E VSD
• Principle of Work: V/F Control Transducer
• Switch Mode: PWM Control
• Main Circuit Type: Voltage
• Voltage of Power Supply: Low Voltage Variable-Frequency Drive
• Link of Transformation: AC-DC-AC Variable-Frequency Drive
• Nature of DC Power: Voltage Variable-Frequency Drive
• Function: Simple Type
• Brand: Machtric
• Voltage Range: 220V & 380 V
• Frequency Range: 0.10~400.00Hz
• Control Method: V/F Control, Space Vector Control.
• Pid Control: Built-in Pid Control
• RS485: Standard RS485 Communication Function(Modbus)
• Multi-Speed: Four Multifunction Input Terminals, 15 Section Sp
• Ambient Temperature: -10 to 40(Non-Freezing)
• Ambient Humidity: Max. 95% (Non-Condensing)
• Altitude: Lower Than 1000m
• Protective Structure: IP20
• Transport Package: Standard Pakage
• Specification: CE, ISO
• Trademark: Machtric
• Origin: China
• HS Code: 85044090
• Production Capacity: 50000

Product Description

Compared with similar products, the mini size is smaller and more economical to install.


 
Product Specifications

Items			S800E
Power Supply	Rated voltage, Frequency		One-phase/Three-phase AC 220V 50/60Hz
	Voltage Range		220V: 170~240V
Output	Voltage Range		220V: 0~220V
	Frequency Range		0.10~400.00Hz
Control method			V/F control, Space vector control.
Indication			Operating status/Alarm definition/interactive guidance: eg , frequency setting, the output frequency/ current, DC bus voltage, the temperature and so on.
Control   SpeciAlations		Output Frequency Range	0.10Hz~400.00Hz
		Frequency Setting Resolution	Digital input: 0.01Hz, analog input: 0.1% of  maximum output frequency
		Output Frequency Accuracy	0.01Hz
		V/F Control	Setting V/F curve to satisfy various load Requirements.
		Torque Control	Auto increase: auto raise torque by loading Condition; Manual increase: enable to set 0.0~20.0% of raising torque.
		Multifunctional Input Terminal	Four multi-function input terminals, realizing functions including fifteen section speed control, Program running, four-section acceleration/deceleration speed switch, UP/DOWN function and emergency stop and other functions
		Multifunctional Output Terminal	1 multi-function output terminals for displaying of running, zero speed, counter, external abnormity, program operation and other Information and warnings.
		Acceleration/ deceleration Time Setting	0~999.9s acceleration/deceleration time can be set individually.
Other      functions		PID Control	Built-in PID control
		RS485	Standard RS485 communication function(MODBUS)
		Frequency Setting	Analog input: 0 to 10 V, 0 to 20mA can be selected; Digital input:Input using the setting dial of the operation panel or RS485 or UP/DOWN. Note:AVI terminals can be used to select an analog voltage input(AV) and analog current input(AI) through the switch J2. Note: AVI terminals can be used to select an Analog voltage input (AV) and analog current Input(AI) through the switch J2.
		Multi-speed	Four multifunction input terminals, 15 section  speed can be set
		Automatic voltage

Product series models

Model	Input	Power Output (KW)	Capacity (KVA)	Current Output (A)	Load Capacity (60s)(A)	Motor Equipped (KW)
S800-2T0.4GE	1PH/3PH 220V- 50/60HZ	0.4	1.0	2.5	3.75	0.4
S800-2T0.75GE		0.75	2.0	5.0	7.50	0.75
S800-2T1.5GE		1.5	2.8	7.0	10.50	1.5

 

Six outstanding standing funcyions and quality:

1.Intelligent parameter setting.
2.Low frequency high torque.
3.Multi-segment run.
4.Automatic voltage regulation.
5.RS485 communication.
6.Low noise.
 
Nine protectiveness take care of your equipment:
1.Overload protection.
2.Overheat protection.
3.Over-voltage protection.
4.Low-voltage protection.
5.Overcurrent protection.
6.Lost phase protection.
7.Ground protection.
8.Short circuit protection.
9.Stalling protection.

    

Mini frequency converter is suitable for light load. For example: Fan, Engraving machine, Convetor.

 
 


Thanks For Looking !!!