| Customization: | Available |
|---|---|
| Application: | High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer |
| Output Type: | Triple |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Control power | AC110V--220V±15%, 50/60Hz |
| Three-phase power |
Standard wiring AC380V, 660V, 1140V±15% Internal delta wiring AC380V±15% |
| Nominal current | 18A--1000A, 22 rated values in total |
| Applicable motor |
Ordinary squirrel cage AC asynchronous motor |
| Start ramp mode | Voltage ramp start and current ramp start |
| Stop mode | Free stop and soft stop |
| Logical input | Impedance 1.8 KΩ, power supply +24V |
| Start frequency | Frequent or infrequent start available, start is advised not to exceed 10 times each other |
| Protective function |
Phase failure, overcurrent, short circuit, SCR protection, overheat, phase current unbalance, wiring and inner fault |
| IP | IP00, IP20 |
| Cooling type | Natural cooling or forced air cooling |
| Installation type | Wall mounted |
| Environmental condition |
When sea altitude is above 2,000m, soft starter should be derated for use. Ambient temperature: -25-+45°C Relative humidity: less than 95%(20°C±5°C) Free of flammable, explosive and corrosive gas or conductive dust. Good ventilation for indoor installation and vibration is less than 0.5G |
){kind=link}