400V 4700UF Bolt Electrolytic Capacitor

• Type: Aluminum Electrolytic Capacitor
• Application: General Purpose, AC / Motor
• Packaging Type: Through Hole
• Capacitance: 4700
• Structure: Fixed Capacitor
• Manufacturing Material: Polypropylene
• Model NO.: 400V 4700uf
• Electrolyte: Electric Heating
• Usage: Low Frequency Coupling
• Tuning: Glass Membrane Capacitor
• Filter: Composite Paper Capacitor
• Rated Voltage: 400V
• Rated Capacity: 4700UF
• Temperature: 85ºC
• Lifetime: 2000h
• Weight: About 648g
• Installation Method: Clamp Fixing
• Packing Quantity: 12PCS/Box
• Surge Voltage: 450VDC
• Capacity Deviation: -20~+20%
• Rated Ripple Current: 11.7A
• ESR Typical Value: 28mΩ
• Frequency: 85ºC 120Hz
• Specification: 77*115mm
• Trademark: CECTN
• Origin: China
• Production Capacity: 5000

Product Description

400V4700uf Introduction to basic parameters of bolt electrolytic capacitor
Rated voltage:	400V	Rated Capacity:	4700uF
Temperature:	85ºC	lifetime:	2000h
Weight:	about 648g	Package size:	77*115mm
Installation method:	Clamp fixing	Accessory:	Screw M6*12 2PCS
Packing quantity:	12pcs/box	Accessories:	Clamp1PCS

 

400V4700uf  Introduction to electrical performance parameters of bolt electrolytic capacitor
Rated voltage	Surge voltage	Rated Capacity	Capacity deviation	Loss tangent	ESR Typical value	Leakage current	Rated ripple current
(V.DC)	(V.DC)	(μF)	(%)	(MAX)	(mΩ)	mA , MAX, 5min	(A)
400	450	4700	-20~+20	0.2	28	5	11.7
		At  120Hz  20ºC					85ºC 120Hz

1.Outline size

 

400V4700uf  Bolt electrolytic capacitor size introduction
D: 76.9mm	d2MAX: 17.4mm	L: 115mm	L1: 120.8mm	Screw: M6X12
c: 88.9mm	d: 98.4mm	a: 31.7mm	H: 30mm	Number of casing layers: 2

2.400V4700uf   Bolt capacitance height


400V4700uF The height of the bolt type aluminum electrolytic capacitor is 115mm, and the height of the terminal is 121.5mm

3.400V4700uf  Bolt aluminum electrolytic capacitor diameter


400V4700uF  Bolt type capacitor product diameter is 76.9mm

4.400V4700uf bolt type capacitor terminal diameter

400V4700uF The bolt type capacitor terminal has a diameter of 17mm, the distance between the two terminals is 31.7mm, and the thread is: M6


5.Internal structure diagram


Bolt type electrolytic capacitor sleeve description


Bolt type aluminum electrolytic capacitor bottom coding description

Package instruction

The electrolytic capacitor is fixed by upper and lower pads made of EPS (polystyrene foam) material. The EPS material has good characteristics of waterproof, impact and anti-extrusion, which can better protect the electrolytic capacitor.

The aluminum electrolytic capacitor is discharged by a conductive strip, and a conductive strip with a resistance of about 3 k ohm is mounted on the pad on the package, and the product is always discharged after being packaged.

Compared with other electrolytic capacitor manufacturers, direct short-circuit discharge such as steel wire can better protect the bolt aluminum electrolytic capacitor.

Bolt type aluminum electrolytic capacitor fittings (clamp mounting structure)



Bolt electrolytic capacitor production process