| Customization: | Available |
|---|---|
| Application: | Three Phase Transducer, General Transducer, Single \Three Phase |
| Output Type: | Triple |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Items |
S800E | ||
| Power Supply |
Rated voltage, Frequency | One-phase/Three-phase AC 220V 50/60Hz |
|
| Voltage Range | 220V: 170~240V |
||
| Output | Voltage Range | 220V: 0~220V | |
| Frequency Range | 0.10~400.00Hz | ||
| Control method | V/F control, Space vector control. | ||
| Indication | Operating status/Alarm definition/interactive guidance: eg , frequency setting, the output frequency/ current, DC bus voltage, the temperature and so on. | ||
| Control SpeciAlations | Output Frequency Range |
0.10Hz~400.00Hz | |
| Frequency Setting Resolution |
Digital input: 0.01Hz, analog input: 0.1% of maximum output frequency |
||
| Output Frequency Accuracy |
0.01Hz | ||
| V/F Control | Setting V/F curve to satisfy various load Requirements. |
||
| Torque Control |
Auto increase: auto raise torque by loading Condition; Manual increase: enable to set 0.0~20.0% of raising torque. |
||
| Multifunctional Input Terminal |
Four multi-function input terminals, realizing functions including fifteen section speed control, Program running, four-section acceleration/deceleration speed switch, UP/DOWN function and emergency stop and other functions |
||
| Multifunctional Output Terminal |
1 multi-function output terminals for displaying of running, zero speed, counter, external abnormity, program operation and other Information and warnings. |
||
| Acceleration/ deceleration Time Setting | 0~999.9s acceleration/deceleration time can be set individually. | ||
| Other functions |
PID Control | Built-in PID control | |
| RS485 | Standard RS485 communication function(MODBUS) | ||
| Frequency Setting | Analog input: 0 to 10 V, 0 to 20mA can be selected; Digital input:Input using the setting dial of the operation panel or RS485 or UP/DOWN. Note:AVI terminals can be used to select an analog voltage input(AV) and analog current input(AI) through the switch J2. Note: AVI terminals can be used to select an Analog voltage input (AV) and analog current Input(AI) through the switch J2. |
||
| Multi-speed | Four multifunction input terminals, 15 section speed can be set |
||
| Automatic voltage |
|||
Model |
Input | Power Output (KW) |
Capacity (KVA) |
Current Output (A) |
Load Capacity (60s)(A) |
Motor Equipped (KW) |
| S800-2T0.4GE | 1PH/3PH 220V- 50/60HZ |
0.4 | 1.0 | 2.5 | 3.75 | 0.4 |
| S800-2T0.75GE | 0.75 | 2.0 | 5.0 | 7.50 | 0.75 | |
| S800-2T1.5GE | 1.5 | 2.8 | 7.0 | 10.50 | 1.5 |
){kind=link}