| Customization: | Available |
|---|---|
| Application: | High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer |
| Output Type: | Triple |
|
Still deciding? Get samples of US$ 159/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item | Item Description | |
| Input | Rated voltage& Frequency | Single /Three phase 220VAC . Three phase 380V.50Hz/60Hz |
| Allowable Voltage range | Voltage fluctuate range:-20%~+20% | |
| Voltage unbalance rate:<3%;Frequency fluctuation:≤5% | ||
| Output | Rated voltage | three phase 0~ input AC voltage |
| Frequency | 0.00~600.00Hz | |
| Overload capacity | Type G:150% 1minute,180% 1 second,200% transient protection | |
| Type P:120% 1minute,150% 1 second,180% transient protection | ||
| Control Function | Modulation mode | Optimal space voltage vector PWM modulation |
| Control mode | Sensorless vector control (SVC), V/F control . Torque control | |
| Frequency accuracy | Digital setting: Max. Frequency ×±0.01% | |
| Analog setting:Max. Frequency×±0.2% | ||
| Frequency resolution | Digital setting :0.01HZ; | |
| Analog setting :Max. Frequency x0.1%. | ||
| Starting frequency | 0.00~10.00Hz | |
| Torque lift | Automatic torque lift: To lift the torque automatically according to the output current. | |
| Manual torque lift, Range: 0.1-30.0% | ||
| Slip compensation | Setting range:0~150%,The inverter output frequency can be auto-regulated within this range according to the motor load, so as to reduce the speed variation of the motor due to load fluctuation. | |
| Acceleration/deceleration | Minutes/Seconds can be selected as time unit .0.1~3600S can be set in sequence . | |
| time | ||
| Carrier frequency | 1.0~15.0KHz | |
| Jog function | Jog frequency range:0.01~600.00Hz, | |
| Jog acceleration /deceleration time 0.1~3600.0S can be set. | ||
| V/F curve | 1:linear curve;2:quadratic;3:user defined V/F curve | |
| Control Function | Automatic energy-saving operation | Auto optimize V/F curve according to the load changes to realize the energy saving operation. |
| Auto voltage regulation (AVR) | When the network voltage changes, it can regulate PWM output automatically to maintain constant voltage. | |
| Built-in PID | This can form a convenient closed-loop control system (CLCS)and is applicable to pressure control, flow control and other process control . | |
| Operation Function | Operating command | Operation panel control ,external terminal control and COM control |
| Frequency setting | Keypad potentiometer setting , operation panel setting,. external terminal UP/DOWN setting, analog voltage signal or external potentiometer setting , analog current signal setting .terminal combination setting ,485 COM setting and so on. | |
| Input Signal | Forward/Reverse signal,multi-speed signal , fault signal , | |
| reset signal etc. | ||
| Output signal | Programmable relay, open collector output , Fault signal output. | |
| Multi-function analog and digital output terminal | This can realize the output of frequency current and other physical quantity by output 0-10V or 0-20mA DC signal and 0-10KHz digital signal output. | |
| Braking function | Dynamic braking | With an external braking resistor, the maximum braking torque may reach 100%. |
| DC Braking | This can be selected when the motor starts or stops with the action frequency of 0-20Hz,action current level of 0-100% and actuation time of 0-30sec., which can be set in sequence. | |
| Other Function | Skip frequency,Jog function, Counter ,Rotation speed tracking, Momentary power loss restart ,Frequency upper/lower limiting, Acceleration/ Deceleration mode can be adjusted ,Frequency meter and Voltmeter output ,Multi-speed/ program running ,Two wire mode/ three wire mode control ,Wobble frequency control, Multi-function input terminal selection , Fault auto reset,RS485 serial communication . | |
| Protection Function | Input phase loss protection, Over current protection ,Overload protection, Over voltage protection ,Under voltage protection, Over heat protection ect. | |
| LED display | Can display the real time running status of the inverter , monitor parameter .function parameter and fault code and other information of the inverter. | |
| Matching parts | Braking assembly, remote keypads and wire connection , communication panel . | |
| Ambient | Place to be used | Indoor location free from direct exposure to sun light, high humidity or dew condensation, high levels of dust, corrosive gas, explosive gas, inflammable gas, oil mist, salt and etc |
| Altitude | Below 1000 M | |
| Ambient Temperature | -10 C to +45 C (Bare Machine: -10 C to+50 C) | |
| Humidity | 20%-90% RH without dew condensation | |
| Vibration | <0.5G | |
| Storage temperature | -20~+60 C | |
| Structure | Protection class | IP20 |
| Cooling mode | Forced air cooling | |
| Installation mode | Wall mounted or floor-type actuator | |
| Model No. | Input Voltage | Rated Output Power (KW) | Rated Input Current(A) | Rated Output Current (A) | Motor Power (KW) |
| Z900-2S0.4GE | 1PH AC 220V?50/60Hz |
0.4 | 5.4 | 2.4 | 0.4 |
| Z900-2S0.75GE | 1PH AC 220V?50/60Hz |
0.75 | 7.2 | 4.5 | 0.75 |
| Z900-2S1.5GE | 1PH AC 220V?50/60Hz |
1.5 | 10 | 7.0 | 1.5 |
| Z900-2S2.2GE | 1PH AC 220V?50/60Hz |
2.2 | 16 | 10.0 | 2.2 |
| Z900-2S3.7GE | 1PH AC 220V?50/60Hz |
3.7 | 23 | 16.0 | 3.7 |
| Z900-4T0.75GE | 3PH AC 380V@50/60Hz |
0.75 | 3.8 | 2.5 | 0.75 |
| Z900-4T1.5GE | 3PH AC 380V@50/60Hz |
1.5 | 5 | 3.7 | 1.5 |
| Z900-4T2.2GE | 3PH AC 380V@50/60Hz |
2.2 | 5.8 | 5.0 | 2.2 |
| Z900-4T3.7GE/5.5GP | 3PH AC 380V@50/60Hz |
3.7/5.5 | 10.0/15.0 | 9.0/13.0 | 3.7/5.5 |
| Z900-4T5.5GE | 3PH AC 380V@50/60Hz |
5.5 | 15.0 | 13.0 | 5.5 |
| Z900-4T7.5GE | 3PH AC 380V@50/60Hz |
7.5 | 14 | 17.5 | 7.5 |
| Z900-4T7.5GE/11GP | 3PH AC 380V@50/60Hz |
7.5/11 | 20.0/26.0 | 17.0/25.0 | 7.5/11 |
| Z900-11GE/15GP | 3PH AC 380V@50/60Hz |
11/15 | 26.0/35.0 | 25.0/32.0 | 11/15 |
| Z900-15GE/ 18.5GP |
3PH AC 380V@50/60Hz |
15/18.5 | 35.0/38.0 | 32.0/37.0 | 15/18.5 |
| Z900-18.5GE/ 22GP |
3PH AC 380V@50/60Hz |
18.5/22 | 38.0/46.0 | 37.0/45.0 | 18.5/22 |
| Z900-22GE/30GP | 3PH AC 380V@50/60Hz |
22/30 | 46.0/62.0 | 45.0/60.0 | 22/30 |
){kind=link}